Anritsu MS2711D handheld spectrum analyzer 100kHz-3GHz
Product Introduction
The MS2711D spectrum analyzer has a coverage range of 100 kHz to 3 GHz, and is equipped with the following functions: preamplifier (standard), battery operation, and outdoor operation. Such a multi-functional and sophisticated design will surely meet your needs. Its unusual performance, ease of use and extensive functions make it an indispensable partner in outdoor applications. It is often used for outdoor or mobile location inspection and field system testing. The configuration option built-in tracking generator can increase the vector analysis capability from 10 MHz to 3.0 GHz.
Describe
The MS2711D handheld spectrum analyzer is an economical handheld spectrum analyzer on the market. The MS2711D frequency range covers 100KHz～3GHz. It is a low-cost and high-efficiency solution for the installation/maintenance of wireless equipment and the problem of spectrum interference.
The MS2711D is so small that you don’t even need to prepare a separate backpack for it to carry it for testing anytime, anywhere. The good thing is that the instrument is equipped with a preamplifier as standard, and the MS2711D will greatly improve the sensitivity of the test.
MS2711D is a solution suitable for field testers that require low cost, light weight and portability. In addition to spectrum measurement, MS2711D can also be equipped with a built-in transmission measurement option, which can complete scalar transmission index measurement in the frequency range of 20MHz to 2.5GHz.
MS2711D has built-in a variety of one-key smart measurement functions, which can test wireless devices more conveniently. These measurement functions of MS2711D include: signal strength, channel power, adjacent channel power (ACPR), occupied bandwidth, etc. Through these measurement functions, it can be judged whether the transmitter of the device under test (such as GSM, CDMA base station, etc.) is working normally and whether the signal is distorted exceed the limit. In addition, MS2711D can also help identify and locate out-of-band spurious signals, and the field strength mode can help test coverage problems or measure electromagnetic leakage problems in broadcast systems.
MS2711D also has a carrier-to-interference ratio measurement function, which can be used to test WLAN AP very conveniently. Other basic measurement functions include: measurement curve average (to improve noise measurement), multi-language user interface (including simplified Chinese), 50 ohms To 75 ohm impedance conversion. In addition, the high-precision power meter option also provides accurate power measurement (accuracy ±0.6dB) in the frequency range of 50MHz to 6GHz.
13590213125
Mail
ChatNow