R&S|ESU8|EMI Receiver|Rohde & Schwarz|EMC Receiver|20Hz to 8GHz
Brand: Germany | Rohde & Schwarz | R&S | Rohde&Schwarz
key point:
R&S ESU is a brand-new EMI test receiver that complies with CISPR16-1-1 standard, which meets all civil and standard electromagnetic interference measurements. The new FFT-based time-domain scanning algorithm can achieve fast initial testing that is 100 times faster than traditional EMI test receivers. R&S ESU also provides automatic and interactive measurement functions, real-time IF analysis and parallel measurement with multiple detectors including CISPR-RMS detection.
Performance characteristics
- Frequency range from 20Hz to 8/26.5/40GHz
- Excellent RF indicators
- Very low measurement uncertainty
- Fully comply with CISPR16-1-1 standard
- Meet all commercial standards
Measuring speed:
- With the option of time domain scanning function, the total measurement time can be greatly reduced
- Realize fast initial test in spectrum analyzer mode (minimum sweep time 2.5ms)
- Receiver mode can perform real-time IF analysis in parallel
- Fast time domain analysis (resolution starts from 10us, monitoring time>2h)
- Remote control via GPIB and LAN (Ethernet) interface
Innovative design:
- All EMC detectors, including CISPR-AV and CISPR-RMS
- Fully automatic measurement (initial test/final test)
- Integrated report generation function (PDF, HTML, RTF file format)
- Windows XP, USB interface, connect memory stick
- Mobile hard disk interface (CF card) option
Summary of advantages:
- EMI test receiver
- Fully comply with CISPR-16-1-1 standard
- Integrated, internal preselector (spectrum analyzer mode can be turned off)
- Integrated pre-amplifier with 20dB gain up to 3.6GHz
- A variety of detector options including CISPR-AVG and CISPR-RMS
- Measurement bandwidth in line with CISPR- and MIL-STD standards
- User editable scan table (max. 10 sub-ranges) (max. 2 million test points/trace)
- Frequency scanning, at most three detectors are opened in parallel (each trace at most 200,0000 points)
- The second RF input (1GHz, with pulse protection function)
- Time domain measurement (up to 200,0000 test points, measurement time ≥10 μs/point)
- Fully automatic or semi-automatic measurement (initial measurement, data screening, final measurement)
Spectrum Analyzer
- Dynamic range and minimum phase noise
-- Scan time
-Span >10 Hz: 2.5 ms to 16 000 s
-0 span: 1 ?s to 16 000 s
- Resolution bandwidth 10Hz to 10MHz, 1/2/3/5 step
- FFT, RRC and channel filters
- Provide general and comprehensive evaluation tools for laboratory applications (time domain power measurement, IP3 measurement, noise measurement/phase noise measurement, channel/adjacent channel measurement)
- A wide range of function correction values ??(cable loss, antenna coefficient) are automatically corrected,
- User editable set of correction coefficients
- Settings and test results can be saved on the hard disk of the instrument or through the LAN and USB ports on the front panel or rear panel
- Modern processor technology (Celeron M, Windows XP embedded) and network (GPIB, LAN, USB), remote desktop function
- Remote control via GPIB or LAN
- LabView, LabWindows/CVI, VXI plug and play equipment
- Compact design (approximately 16kg)
13590213125
Mail
ChatNow